China OEM 1688/Wholesale Right/Left Hand Female Thread Rose Joint/Heim Joints/Rod Ends Bearing(PHS10)/Car Door/Engineering Machinery/Automation Equipment Bearings. deep groove ball bearing

Product Description

1688/Wholesale Right/Left Hand Female Thread Rose Joint/Heim Joints/Rod Ends Bearing(PHS10)/
Car Door/Engineering Machinery/Automation Equipment Bearings.


As a rule, rod ends are available with left or right-hand female or male threads. Rod ends have the sliding contact
surface combinations steel-on-steel, steel-on-bronze, steel-on-PTFE CZPT material, and steel-on-PTFE fabric.

Industrial Truck Parts Rod Ends Bearing

Product Name Rod Ends
Precision Rating P0, P6, P5, P4, P2
Material Bearing Steel  (GCr15)
Clearance  C1 C2 C3 
Vibration & Noisy Z1,Z2,Z3 V1,V2,V3
Features High Precision, High Speed, Long Life, High Reliability, Low Noise , Reduce Friction
Certification ISO 9001:2008
Packing 1.Neutral Packing Bearing  2.Industrial Packing  3.Commercial Packing Bearing  4.Customize
Delivery Time 30 – 45 Days After The Order is Confirmed
Shippment 1.By Sea  2.By Air  3.By Express
Website http://hlimachinery

PHS Series Requiring Maintenance  Rod End Bearing Specification 

Model Dimensions(mm) Load Ratings Mass
d d3 B C1 L3 W d2 d1 h1 L4 L5 d4 d5 dk α C C0 kg
6H min
PHS4 4 M4x0.7 7 5.25 8 8 14 6.5 24 31 4 8 9.5 9.525 13 3 5 0.009
PHS5 5 M5x0.8 8 6 10 9 16 7.7 27 35 4 8.5 11 11.11 13 3.25 5.7 0.016
PHS6 6 M6x1.0 9 6.75 12 11 18 8.96 30 39 5 10 13 12.7 13 4.3 7.2 0.571
PHS8 8 M8x1.25 12 9 16 14 22 10.4 36 47 5 12.5 16 15.88 14 7.2 11.6 0.047
PHS10 10 M10x1.5 14 10.5 20 17 26 12.9 43 56 6.5 15 19 19.05 13 10 14.5 0.077
PHS10-1 10 M10x1.25 14 10.5 20 17 26 12.9 43 56 6.5 15 19 19.05 13 10 14.5 0.077
PHS12 12 M12x1.75 16 12 22 19 30 15.4 50 65 6.5 17.5 22 22.23 13 13.4 17 0.1
PHS12-1 12 M12x1.25 16 12 22 19 30 15.4 50 65 6.5 17.5 22 22.23 13 13.4 17 0.1
PHS14 14 M14x2.0 19 13.5 25 22 34 16.9 57 74 8 20 25 25.4 16 17 24 0.16
PHS14-1 14 M14x1.5 19 13.5 25 22 34 16.9 57 74 8 20 25 25.4 16 17 24 0.16
PHS16 16 M16x2.0 21 15 28 22 40 19.4 64 84 8 22 27 28.58 15 21.6 28.5 0.22
PHS16-1 16 M16x1.5 21 15 28 22 40 19.4 64 84 8 22 27 28.58 15 21.6 28.5 0.22
PHS18 18 M18x1.5 23 16.5 32 27 44 21.9 71 93 10 25 31 31.75 15 26 42.5 0.32
PHS20 20 M20x1.5 25 18 33 30 50 24.4 77 102 10 27.5 34 34.93 14 31.5 42.5 0.42
PHS22 22 M22x1.5 28 20 37 32 54 25.8 84 111 12 30 38 38.1 15 38 57 0.54
PHS25 25 M24x2.0 31 22 42 36 60 29.6 94 124 12 33.5 42 42.85 15 47.5 68 0.73
PHS28 28 M27x2.0 35 24 48 41 66 32.3 103 136 14 37 46 47.6 15 58 75 0.98
PHS30 30 M30x2.0 37 25 51 41 70 34.8 110 145 15 40 50 50.8 17 64 88 1.1
PHS30-1 30 M27x2.0 37 25 51 41 70 34.8 110 145 15 40 50 50.8 17 64 88 1.1

                                                                        About Us

HENGLI Machinery Company is a well-established Chinese bearing supplier. We design, manufacture and wholesale bearings.

Our specialized manufacturer of Spherical Roller Bearing Cylindrical Roller Bearing, XIHU (WEST LAKE) DIS. Rolling Bearing Co., Ltd

was established in 1970 and is accredited by the Chinese Ministry of Machine Building.

We invested in 2 additional specialized bearing factories, which allow us to provide our clients with top of the line products such

as Needle Roller Bearings, Cam Follower Bearing, Thrust Bearings, Spherical Plain Bearings, Rod Ends Bearings, Ball Joint

Bearings, Tapered Roller Bearings,Wheel Hub Bearings, Thrust Bearing and Non-Standard Bearings.


Q1 – What is our advantages?

     A    – Manufacturer – Do it only with the Best;

            -Your Choice make different. 

Q2 – Our Products

 A   – Spherical Roller Bearing, Cylindrical Roller Bearing, Needle Roller Bearing, Cam Followers, Thrust Bearing

      – Spherical Plain Bearing, Rod End, Ball Joint, Wheel Hub, Tapered Roller Bearing

Q3 – Process of our production

 A – Heat Treatment – Grinding – Parts Inspection – Assembly – Final Inspection – Packing

Q4 – How to customize bearing(non-standard) from your company?

 A -We offer OEM,Customized(Non-standard) service and you need to provide drawing and detailed Technical Data.

Q5 –   What should I care before installation?

 A   – Normally, the preservative with which new bearings are coated before leaving the factory does not need to be

        removed; it is only necessary to wipe off the outside cylin­drical surface and bore, if the grease is not compatible

        with the preservative, it is necessary to wash and carefully dry the bearing.

      -Bearings should be installed in a dry, dust-free room away from metal working or other machines producing

        swarf and dust.

Q6 – How to stock and maintenance my bearings right? 

 A   – Do not store bearings directly on concrete floors, where water can condense and collect on the bearing;

      -Store the bearings on a pallet or shelf, in an area where the bearings will not be subjected to high humidity

       or sudden and severe temperature changes that may result in condensation forming;

      -Always put oiled paper or, if not available, plastic sheets between rollers and cup races of tapered roller bearings.

Rolling Element: Single Row
Structure: Rod End
Material: Bearing Steel
Load Direction: Radial Spherical Plain Bearing
Add Lubricant: Non Self-lubricating
Outer Structure: Whole Outer Ring
US$ 1/Piece
1 Piece(Min.Order)

Request Sample



Customized Request


Choosing the Right Ball Bearing for Your Application

When choosing a Ball Bearing, there are several things to consider. These factors include: the size, lubricant type, presence of corrosive agents, stray electrical currents, and more. It can be challenging to choose the right type, size, and type of ball bearing for your application. You should also carefully calculate the loads to determine the right size. Here are some tips for choosing the right Ball Bearing for your application.


The single-row ball bearing is one of the most popular types of bearings. The inner and outer ring are designed with raceway grooves that are shaped slightly larger than the balls. This type of bearing has a low torque and can handle high-speed applications with minimal power loss. The radial dimensions of single-row ball bearings also vary, so it is possible to find one that fits your specific application. Besides the above-mentioned advantages, single-row ball bearings are also available with varying grease levels and are widely applicable to applications where the space is limited.
Single-row ball bearings are also called angular-contact ball bearings. Because of their single-row design, they are not separable and can accommodate a high-speed, heavy-duty application. Single-row angular-contact ball bearings can only handle axial load in one direction, and they must be installed in pairs for pure radial loads. Single-row ball bearings are a popular type of rolling bearings and can be used for a wide range of applications.


The self-aligning ball bearing was invented by Sven Wingquist, a plant engineer for a textile company in Sweden. While he was responsible for making production as efficient as possible, he soon realized that the machinery he had in place wasn’t working as efficiently as it could. Although ball bearings are great for reducing friction, they were not flexible enough to compensate for misalignments in the machine.
Self-aligning ball bearings have two rows of balls and a common sphered raceway. The inner ring is curved and combines the two rows of balls into one cage. These bearings can tolerate shaft misalignment and compensate for static angular defects. They can be used in simple woodworking machinery, ventilators, and conveying equipment. They are often the preferred choice for applications where shaft alignment is an issue.


A Ceramic ball bearing is a type of high-performance bearing that is available in both full-ceramic and hybrid forms. The main differences between ceramic and steel ball bearings are their construction, lubrication, and mobility. High-quality ceramic ball bearings are durable, and they are ideal for corrosive and high-temperature applications. The material used to create these bearings helps prevent electrolytic corrosion. They are also ideal for reducing the friction and lubrication requirements.
Ceramic balls are harder and less brittle than steel balls, which gives them a higher degree of rigidity. Ceramics also have a higher hardness, with a hardness of Rc75-80 compared to Rc58-64 for steel balls. Their high compressive strength is approximately 5 to 7 times greater than steel. In addition, they have a very low coefficient of friction, which allows them to spin at higher speeds and with less friction. This increases their lifespan and durability, and decreases the energy needed to turn cranks.


Unlike traditional bearings, steel balls have a relatively uniform hardness. Carbon steel, for instance, is 2.1% carbon by weight. According to the American Iron and Steel Institute, copper content must be no more than 0.40% and manganese content should not be more than 1.65 g/cm3. After carbonizing, steel balls undergo a process called sizing, which improves their roundness geometry and hardness.
The main differences between steel ball bearings and ceramic ball bearings can be traced to their different materials. Ceramic balls are made from zirconium dioxide or silicon nitride. Silicon nitride is harder than steel and resists shocks. The result is increased speed and longer service life. Polyoxymethylene acetal (PMMA) bearing balls are known for their stiffness, strength, and tolerance, but are not as common as steel ball bearings.


The most popular types of plastic ball bearings are made of polypropylene or PTFE. These bearings are used in applications requiring higher chemical resistance. Polypropylene is a structural polymer that offers excellent physical and chemical properties, including excellent resistance to organic solvents and degreasing agents. Its lightweight, low moisture absorption rate, and good heat resistance make it an excellent choice for high-temperature applications. However, plastic bearings are not without their drawbacks, especially when operating at very high temperatures or under heavy loads.
Compared to metal bearings, plastic ball-bearings do not require lubrication. They also are highly corrosion-resistant, making them an excellent choice for wash-down applications. They are also post-, autoclave-, and gamma sterilizable. Many conventional steel ball-bearings cannot handle the high temperatures of food processing or swimming pools. In addition to high temperature applications, plastic ball bearings are resistant to chemicals, including chlorine.


Plastic sliding bearings are molded bearings made of engineering plastic. With self-lubricating modification technology, these bearings can be produced by injection molding of plastic beads. They are widely used in various industries such as office equipment, fitness and automotive equipment. In addition to plastic bearings, glass balls are used in a variety of other applications, including medical equipment. Glass ball bearings have excellent corrosion resistance, excellent mechanical properties, and are electrically insulators.
Plastic ball bearings are made of all-plastic races and cages. These bearings are suitable for applications that are exposed to acids and alkalis. Because they are cheaper than glass balls, plastic ball bearings are popular in chemical-exposed environments. Stainless steel balls are also resistant to heat and corrosion. But the main disadvantage of plastic ball bearings is that they are not as strong as glass balls. So, if weight and noise is your main concern, consider using plastic balls instead.


The global miniature ball bearing market is expected to reach US$ 2.39 Billion by 2027, at a CAGR of 7.2%. Growth in the region is attributed to technological advancement and government initiatives. Countries such as India and China are attracting FDIs and emphasizing the establishment of a global manufacturing hub. This is boosting the market for miniature ball bearings. The miniscule ball bearings are manufactured in small quantities and are very small.
Some manufacturers produce miniature ball bearings in different materials and designs. Chrome steel is the most popular material for miniature ball bearings because of its high load capacity, low noise properties, and lower cost. But the cost of stainless steel miniature bearings is low, since the amount of steel used is minimal. Stainless steel miniature bearings are the smallest in size. Therefore, you can choose stainless steel mini ball bearings for high-speed applications.


Angular-contact ball bearings have three components: a cage, inner ring, and balls. Angular-contact ball bearings can support high axial and radial loads. Various design and manufacturing attributes make angular-contact ball bearings suitable for a variety of applications. Some features of this bearing type include a special lubricant, different cage materials, and different coatings.
The size of an angular-contact ball bearing is determined by the design units: outer ring width, axial load, and radial load. Depending on the type of application, an angular-contact ball bearing may be manufactured in double-row, triple-row, or quadruple-row configurations. Angular contact ball bearings can be classified according to their design units, which range from metric to imperial. A higher ABEC number means tighter tolerances. To determine the tolerance equivalent of a particular bearing, consult a standard Angular-contact ball bearing table.
Angular-contact ball bearings feature high and low-shoulder configurations. They have two-dimensional races that accommodate axial and radial loads. They are available in self-retaining units with solid inner and outer rings, and ball and cage assemblies. Cages made of cast and wrought brass are the most popular, but lightweight phenolic cages are also available. The latter is a better choice because it doesn’t absorb oil and has lower rolling friction.


When it comes to the construction of a ball bearing, high-quality raw materials are a crucial component. These materials not only affect the overall quality of a ball bearing, but also influence the cost. That’s why you should pay close attention to raw material quality. In addition to that, raw materials should be tested several times before the manufacturing process to ensure quality. Read on for some information about the different types of materials used to make ball bearings.
Steel is the most common material for ball bearings. Most ball bearings contain stainless steel balls, which are remarkably corrosion-resistant. They are also resistant to saltwater and alkalis. However, stainless steel balls are heavier than plastic ones, and they are also magnetic, which may be a drawback in some applications. If you’re looking for a metal-free option, glass balls are the way to go. They’re sturdy, lightweight, and resistant to a wide range of chemicals.

China OEM 1688/Wholesale Right/Left Hand Female Thread Rose Joint/Heim Joints/Rod Ends Bearing(PHS10)/Car Door/Engineering Machinery/Automation Equipment Bearings.   deep groove ball bearingChina OEM 1688/Wholesale Right/Left Hand Female Thread Rose Joint/Heim Joints/Rod Ends Bearing(PHS10)/Car Door/Engineering Machinery/Automation Equipment Bearings.   deep groove ball bearing
editor by CX


Recent Posts