China Hydraulic Cylinder Rod End Ball Joint Bearing (GF…DO Series 20-120mm) drive shaft bearing

Merchandise Description

Solution Description

  • Rod end bearing, also known as a heim joint (N. The usa) or rose joint (U.K. and somewhere else), is a mechanical articulating joint.
  • Such joints are utilised on the finishes of handle rods, steering hyperlinks, tie rods, or wherever a precision articulating joint is required.
  • A ball swivel with an opening by way of which a bolt or other attaching components could pass is pressed into a round casing with a threaded shaft connected.
  • The threaded portion could be possibly male or woman

JLD Rod End Feature

1. Still left or right hand threaded rod                                 2. Male or woman / hollow / interior thread rod ends 
3. Machining or forging rod ends                                  4. Surface: White Zinc, brass, Chrome, Nickle and so on 
five. Higher precision                                                           6. Metric and inches sizes available 
7. High & Secure quality                                                 8. OEM / Custom-made Service   

 

Merchandise Name Hydraulic cylinder rod finish ball joint bearing (GF…DO Collection 20-120mm)
Product No. GF…DO sereis: 20/twenty five/30/35/40/45/fifty/60/70/80/ninety/a hundred/one hundred ten/120mm 
Substance Carbon Steel forty five# / Q345
Payment T/T, Paypal, Western Union, L/C
Other Model No. GK…NK collection: 20/twenty five/thirty/35/forty/50/sixty/70/eighty/ninety/one hundred/a hundred and ten/120/140/160mm
GK…SK series: 20/twenty five/thirty/35/forty/fifty/sixty/70/80/90/100/a hundred and ten/one hundred twenty/140/160mm
GK…DO series: 10/twelve/fifteen/17/20/twenty five/thirty/35/40/45/fifty/60/70/80mm
GF…DO sereis: 20/25/thirty/35/40/forty five/fifty/sixty/70/80/90/one hundred/a hundred and ten/120mm 
GK…CK collection: 12/16/20/twenty five/32/40/fifty/fifty three/70/eighty/90/one hundred/110/one hundred twenty five/a hundred and sixty/two hundred/250/300mm
SIQG…E(S) series: 12/sixteen/20/25/32/40/50/63/70/eighty/ninety/a hundred/a hundred and ten/125mm
Fuel… sequence: 20/25/30/35/forty/50/sixty/70/eighty/90/a hundred/one hundred ten/a hundred and twenty/140/160mm
GIHR…DO collection: 20/twenty five/thirty/35/forty/50/sixty/70/80/90/a hundred/one hundred ten/120mm
GIHR-K…DO series: 20/25/30/35/forty/50/60/70/eighty/ninety/one hundred/110/120mm
GIHN-K…LO series: 12/16/20/25/32/forty/fifty/63/70/80/90/100/one hundred ten/125mm
Application Rod finish is extensively utilized for engineering hydraulic oil cylinder, Forging machine equipment, engineering equipment, automation equipment, automobile shock absorber, hydraulic equipment and other industries. Self lubricating joints and auxiliary promise employed in water conservancy, specialist equipment and other industries.
OEM & ODM We are professional bearing producer. OEM & Tailored Support are equally approved to our R&D office. If you need to have please display us with your drawing although inquiry. Thank you

 

JLD Rod Conclude Bearing Proportions:

Connected Bearings

 

About Us

HangZhou Metropolis CZPT Bearing Co., Ltd. Is a professional producer of linear movement items given that 2007. We specialised in producing linear guidesball screwslinear shaftslinear movement slide unitslinear bearingsrod finishes bearingscam follower bearings/Needle roller bearingprecision linear module with good high quality and competitive cost. For OEM service, the products can be Customized according to customers’ needs for standard or non-standard bearings. 

 

Our Services

Our High quality: 
Good quality is the existence . We use only the ideal quality materials to guarantee the top quality with most aggressive cost.
All goods we sold out are strictly picked and tested by our QC section.
Guarantee: 
We give one year guarantee for all goods and our provider is for the all life time.
Payment: 
We acknowledge payment through TT (Bank transfer), Paypal,Western Union, and Money Gram.
We acknowledge bank transfer for big orders. For modest purchase, you’d much better shell out through Paypal,Western union or Money Gram.
Shipping and delivery: 
We provide as numerous shipping options as achievable, including DHL, UPS, TNT, FEDEX and EMS, Airfreight and by Sea.
 

FAQ
one. Are you factory or investing business?
We are manufacturing facility with most competitive price and high good quality. We are Alibaba Gold Provider seller because 2011. 

2. Customized acknowledged?
Of course, of system, this kind of as the bearing manufacturer of Japanese, United states, Sweden and so on are offered. If that, please send out us the drawing of the kind with the photo will be most appreciated.  

three. Can I get some samples or more discounts?
Sure, just to get in touch with us and we are honored to offer you samples to you for checking. 

four. How about the time of shipping and delivery ?
For the items in inventory, it will be sent out in 1-3 times Or it will be sent out 3-30 days according to the amount.  

5. What’s your items major line?
Because 2007, we specialized in producing all types of linear shaft, linear bearing, flange bearing, ball screw, linear CZPT way, linear motion ball bearing, needle roller bearing, and so forth.

six. How can I get a quotation?
Usually, we will quotation in 24 hrs. If you are in urgent, you should give a call or permit us know in your electronic mail with the details.
We want data bellow:
one.The Model Number/ the element drawing of non-regular bearing
2.Quantity
three.Material
4.Surface area treatment 
five.Any specific packing or other demands. 

Principal Goods

 

Rolling Element: Single Row
Structure: Rod End
Material: Steel
Add Lubricant: Non Self-lubricating
Outer Structure: Whole Outer Ring
Rod End: Rod End

###

Samples:
US$ 2/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:

###

Product Name Hydraulic cylinder rod end ball joint bearing (GF…DO Series 20-120mm)
Model No. GF…DO sereis: 20/25/30/35/40/45/50/60/70/80/90/100/110/120mm 
Material Carbon Steel 45# / Q345
Payment T/T, Paypal, Western Union, L/C
Other Model No. GK…NK series: 20/25/30/35/40/50/60/70/80/90/100/110/120/140/160mm
GK…SK series: 20/25/30/35/40/50/60/70/80/90/100/110/120/140/160mm
GK…DO series: 10/12/15/17/20/25/30/35/40/45/50/60/70/80mm
GF…DO sereis: 20/25/30/35/40/45/50/60/70/80/90/100/110/120mm 
GK…CK series: 12/16/20/25/32/40/50/53/70/80/90/100/110/125/160/200/250/300mm
SIQG…E(S) series: 12/16/20/25/32/40/50/63/70/80/90/100/110/125mm
GAS… series: 20/25/30/35/40/50/60/70/80/90/100/110/120/140/160mm
GIHR…DO series: 20/25/30/35/40/50/60/70/80/90/100/110/120mm
GIHR-K…DO series: 20/25/30/35/40/50/60/70/80/90/100/110/120mm
GIHN-K…LO series: 12/16/20/25/32/40/50/63/70/80/90/100/110/125mm
Application Rod end is widely used for engineering hydraulic oil cylinder, Forging machine tools, engineering machinery, automation equipment, car shock absorber, hydraulic machinery and other industries. Self lubricating joints and auxiliary promise used in water conservancy, professional machinery and other industries.
OEM & ODM We are professional bearing manufacturer. OEM & Customized Service are both accepted to our R&D department. If you need please show us with your drawing while inquiry. Thank you
Rolling Element: Single Row
Structure: Rod End
Material: Steel
Add Lubricant: Non Self-lubricating
Outer Structure: Whole Outer Ring
Rod End: Rod End

###

Samples:
US$ 2/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:

###

Product Name Hydraulic cylinder rod end ball joint bearing (GF…DO Series 20-120mm)
Model No. GF…DO sereis: 20/25/30/35/40/45/50/60/70/80/90/100/110/120mm 
Material Carbon Steel 45# / Q345
Payment T/T, Paypal, Western Union, L/C
Other Model No. GK…NK series: 20/25/30/35/40/50/60/70/80/90/100/110/120/140/160mm
GK…SK series: 20/25/30/35/40/50/60/70/80/90/100/110/120/140/160mm
GK…DO series: 10/12/15/17/20/25/30/35/40/45/50/60/70/80mm
GF…DO sereis: 20/25/30/35/40/45/50/60/70/80/90/100/110/120mm 
GK…CK series: 12/16/20/25/32/40/50/53/70/80/90/100/110/125/160/200/250/300mm
SIQG…E(S) series: 12/16/20/25/32/40/50/63/70/80/90/100/110/125mm
GAS… series: 20/25/30/35/40/50/60/70/80/90/100/110/120/140/160mm
GIHR…DO series: 20/25/30/35/40/50/60/70/80/90/100/110/120mm
GIHR-K…DO series: 20/25/30/35/40/50/60/70/80/90/100/110/120mm
GIHN-K…LO series: 12/16/20/25/32/40/50/63/70/80/90/100/110/125mm
Application Rod end is widely used for engineering hydraulic oil cylinder, Forging machine tools, engineering machinery, automation equipment, car shock absorber, hydraulic machinery and other industries. Self lubricating joints and auxiliary promise used in water conservancy, professional machinery and other industries.
OEM & ODM We are professional bearing manufacturer. OEM & Customized Service are both accepted to our R&D department. If you need please show us with your drawing while inquiry. Thank you

Materials Used in Bearings

If you’re not familiar with the types of bearings, you may be interested in knowing more about the materials used to manufacture them. Here’s a look at what each type of bearing is made of, how it’s used, and how much they cost. To find the right bearing for your application, it’s important to choose a quality lubricant. The materials used in bearings are determined by their type and applications. Choosing the right lubricant will extend its life, and protect your machine’s parts from damage and premature wear.

Materials used in bearings

Bearings are made from a variety of materials. Stainless steel is a common material used for the components of bearings. It has a higher content of chromium and nickel. When exposed to oxygen, chromium reacts with it to form chromium oxide, which provides a passive film. For higher temperatures, teflon and Viton are also used. These materials offer excellent corrosion resistance and are often preferred by manufacturers for their unique properties.
Stainless steel is another material used in bearings. AISI 440C is a high-carbon stainless steel commonly used in rolling-contact bearings. It is widely used in corrosive environments, especially in applications where corrosion resistance is more important than load capacity. It can also be heat-treated and hardened to 60 HRC, but has lower fatigue life than SAE 52100. Stainless steel bearings may carry a 20-40% price premium, but their superior performance is worth the extra money.
Graphite and molybdenum disulfide are two of the most common materials used in bearings. While graphite is a popular material in bearings, it has very poor corrosion resistance and is unsuitable for applications where oil or grease is required. Graphite-based composite materials are another option. They combine the benefits of both graphite and ceramic materials. A variety of proprietary materials have been developed for high-temperature use, such as graphite and MoS2.
Wood bearings have been around for centuries. The oldest ones used wood and Lignum Vitae. These materials were lightweight, but they were incredibly strong and durable. Wood bearings were also lubricated with animal fats. During the 1700s, iron bearings were a popular choice. In 1839, Isaac Babbitt invented an alloy containing hard metal crystals suspended in a softer metal. It is considered a metal matrix composite.

Applications of bearings

bearing
Bearings are used in many different industries and systems to help facilitate rotation. The metal surfaces in the bearings support the weight of the load, which drives the rotation of the unit. Not all loads apply the same amount of force to bearings, however. Thrust and radial loads act in distinctly different ways. To better understand the different uses of bearings, let’s examine the various types of bearings. These versatile devices are essential for many industries, from automobiles to ships and from construction to industrial processes.
Cylindrical roller bearings are designed to support heavy loads. Their cylindrical rolling element distributes the load over a larger area. They are not, however, suited to handling thrust loads. Needle bearings, on the other hand, use small diameter cylinders and can fit into tighter spaces. The advantages of these types of bearings are numerous, and many leading producers are now leveraging the Industrial Internet of Things (IIoT) to develop connected smart bearings.
As a power generation industry, bearings play an essential role. From turbines to compressors, from generators to pumps, bearings are essential components of equipment. In addition to bearings, these components help move the equipment, so they can work properly. Typically, these components use ball bearings, although some roller bearings are used as well. In addition to being efficient and durable, these types of bearings also tend to be built to meet stringent internal clearance requirements and cage design requirements.
In addition to bearings for linear motion, bearings can also bear the weight of a rotary part. Depending on the application, they can be designed to minimize friction between moving parts. By constraining relative motion, bearings are used to reduce friction within a given application. The best-designed bearings minimize friction in a given application. If you’re in the market for a new bearing, NRB Industrial Bearings Limited is an excellent source to begin your search.

Types of bearings

bearing
The type of bearings you choose will have a significant impact on the performance of your machinery. Using the right bearings can increase efficiency, accuracy, and service intervals, and even reduce the cost of purchasing and operating machinery. There are several different types of bearings to choose from, including ball bearings and flexure bearings. Some types use a fluid to lubricate their surfaces, while others do not.
Plain bearings are the most common type of bearing, and are used for a variety of applications. Their cylindrical design allows for a relatively smooth movement. Often made of copper or other copper alloy, they have low coefficients of friction and are commonly used in the construction industry. Some types of plain bearings are also available with a gudgeon pin, which connects a piston to a connecting rod in a diesel engine.
Magnetic bearings are the newest type of bearing. They use permanent magnets to create a magnetic field around the shaft without requiring any power. These are difficult to design, and are still in the early stages of development. Electromagnets, on the other hand, require no power but can perform very high-precision positioning. They can be extremely durable and have a long service life. They are also lightweight and easy to repair.
Another type of bearing is needle roller. These are made of thin, long, and slender cylinders that are used in a variety of applications. Their slender size is ideal for a space-constrained application, and their small profile allows them to fit in tight places. These types of bearings are often used in automotive applications, bar stools, and camera panning devices. They have several advantages over ball bearings, including the ability to handle heavy axial loads.

Cost of bearings

A wide range of factors affect the cost of aerospace bearings, including the bearing material and its volatility. Manufacturers typically use high-grade steel for aircraft bearings, which are highly affected by fluctuations in the steel price. Government policies also play a part in the variation in trade price. The implementation of COVID-19 has changed the market dynamics, creating an uncertain outlook for supply and demand of aerospace bearings. New trade norms and transportation restrictions are expected to hamper the growth of this industry.
Demand for aerospace bearings is largely driven by aircraft manufacturers. In North America, aircraft manufacturers must meet extremely high standards of weight, performance, and quality. They also must be lightweight and cost-effective. This has resulted in a rising cost of aerospace bearings. The market for aerospace bearings is expected to grow at the highest CAGR over the next few years, driven by increasing investments in defense and aerospace infrastructure across Asia-Pacific.
Hub assemblies are also expensive. A wheel hub will cost between $400 and $500 for one set of bearings. In addition to this, the speed sensor will be included. The average cost of wheel bearings is between $400 and $500 for one side, including labor. But this price range is much lower if the bearing is a replacement of an entire wheel assembly. It is still worth noting that wheel hub bearings can be purchased separately for a lower price.
Replacement of one or two wheel bearings will depend on the model and year of the vehicle. For a small car, one rear wheel bearing can cost between $190 and $225, whereas two front wheel hubs can cost upwards of $1,000. Labor and parts prices will vary by location, and labor costs may also be covered under some warranty plans. If you decide to have it done yourself, be sure to ask multiple shops for estimates.

Inspection of bearings

bearing
To maintain bearing performance and prevent accidents, periodic inspections are essential. In addition to ensuring reliability, these inspections improve productivity and efficiency. Regular maintenance includes disassembly inspection, replenishment of lubricant and monitoring operation status. Here are some common ways to perform the necessary inspections. Keep reading to learn how to maintain bearings. After disassembly, you must clean the components thoroughly. Ensure that the bearings are free of burrs, debris, and corrosion.
Ultrasound technology is an excellent tool for monitoring slow-speed bearings. Most ultrasound instruments offer wide-ranging sensitivity and frequency tuning. Ultrasound can also be used to monitor bearing sound. Ultra-slow bearings are usually large and greased with high-viscosity lubricant. Crackling sounds indicate deformity. You can also listen for abnormal noise by plugging a vibration analyzer into the machine. Once the machine shows abnormal noise, schedule additional inspections.
Ultrasonic inspection involves using an ultrasound transducer to measure the amplitude of sound from a bearing. It is effective in early warnings of bearing failure and prevents over-lubrication. Ultrasound inspection of bearings is a cost-effective solution for early diagnosis of bearing problems. In addition to being a reliable tool, ultrasonic testing is digital and easy to implement. The following are some of the advantages of ultrasonic bearing inspection.
Dynamic quality evaluation involves the use of a special fixture for measuring bearing deformations under low shaft speed and light radial load. The size of the fixture influences the value of the deformations. A fixture should be sized between the diameter of the sensor and the roller to ensure maximum precision. The outer deformation signal is more sensitive with a larger sensor diameter. A vibration-acceleration sensor is used for the contrast test.

China Hydraulic Cylinder Rod End Ball Joint Bearing (GF...DO Series 20-120mm)     drive shaft bearingChina Hydraulic Cylinder Rod End Ball Joint Bearing (GF...DO Series 20-120mm)     drive shaft bearing
editor by czh 2023-01-18

Recent Posts