China 51206 High Performance Single Row Thrust Ball Bearing bearing assembly

Product Description

 

Merchandise

Size (mm) Load rating (kN) Limit pace (r/min) Excess weight
d D T Ca Coa Grease Oil (kg)
511

 

Do you choose that we remind you ?

Fast and cost-free get in touch with/email back again

 

 

 

2nd stage: the outside diameter of the bearing

  •  
  • A / Put your bearing on the grid as demonstrated in the diagram.
  •  
  • B / Mark the define of the outer ring. For more comfort, use a pencil with a wonderful level.
  •  
  • C / For simplicity of reading through, do not hesitate to attract lines to the axes and then take the measurement.

 

 

 

 

third step: the thickness of the bearing

  •  
  • A / In the identical way as for the outer diameter and the bore, spot your bearing on the edge on the grid as shown in the diagram.
  • B / Attract the outer contour.
  •  
  • C / For relieve of reading through, do not hesitate to attract traces to the axes and then just take the measurement.

 

 

 

 

Conclusion :

You now have 3 measuring factors that will allow you to determine your bearing: the inside diameter (or bore), the exterior diameter, and the thickness.

You can postpone these measurements in our bearing lookup tool on our internet site

 

You lookup, we discover !

 


/ Piece
|
100 Pieces

(Min. Order)

###

Contact Angle: 0
Aligning: Non-Aligning Bearing
Separated: Separated
Rows Number: Single
Load Direction: Thrust Bearing
Material: Bearing Steel

###

Samples:
US$ 1/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:
Available

|


###

Item
Size (mm) Load rating (kN) Limit speed (r/min) Weight
d D T Ca Coa Grease Oil (kg)
51100 10 24 9 10 14 6500 1000 0.02
51200 10 26 11 12.7 17.1 5700 8800 0.03
51101 12 26 9 10.3 15.4 6500 10000 0.022
51201 12 28 11 13.2 19 5400 8300 0.034
51102 15 28 9 10.5 16.8 6100 9400 0.024
51202 15 32 12 16.6 24.8 4900 7500 0.046
51103 17 30 9 10.8 18.2 6100 9400 0.028
51203 17 25 12 17.2 27.3 4900 7500 0.053
51104 20 25 10 14.2 24.7 5100 7900 0.04
51204 20 40 14 22.3 37.7 3900 6000 0.082
51304 20 47 18 35 55.8 3600 4500 0.092
51105 25 42 11 19.5 37.2 4400 6800 0.059
51205 25 47 15 27.8 50.4 3600 5500 0.12
51305 25 52 18 35.7 61.4 3100 4800 0.18
51405 25 60 24 55.6 89.4 2600 4000 0.34
51106 30 47 11 20.4 42.2 4300 6600 0.068
51206 30 52 16 29.3 58.2 3400 5200 0.15
51306 30 60 21 42.8 78.7 2700 4200 0.27
51406 30 70 28 72.8 126 2200 3400 0.53
51107 35 52 12 20.4 44.7 3900 6000 0.09
51207 35 62 18 39.2 78.2 2900 4500 0.22
51307 35 68 24 55.5 105 2400 3700 0.39
51407 35 80 32 87.1 155 1900 2900 0.79
51108 40 60 13 26.9 62.8 3400 5300 0.12
51208 40 68 19 46.9 98.3 2700 4200 0.27
51308 40 78 26 69.3 135 2100 3300 0.55
51408 40 90 36 113 205 1700 2600 1.14
51109 45 65 14 27.8 69.1 3200 5000 0.15
51209 45 73 20 47.7 105 2600 4000 0.32
51309 45 85 28 80 163 1900 3000 0.69
51409 45 100 39 130 242 1500 2300 1.47

/ Piece
|
100 Pieces

(Min. Order)

###

Contact Angle: 0
Aligning: Non-Aligning Bearing
Separated: Separated
Rows Number: Single
Load Direction: Thrust Bearing
Material: Bearing Steel

###

Samples:
US$ 1/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:
Available

|


###

Item
Size (mm) Load rating (kN) Limit speed (r/min) Weight
d D T Ca Coa Grease Oil (kg)
51100 10 24 9 10 14 6500 1000 0.02
51200 10 26 11 12.7 17.1 5700 8800 0.03
51101 12 26 9 10.3 15.4 6500 10000 0.022
51201 12 28 11 13.2 19 5400 8300 0.034
51102 15 28 9 10.5 16.8 6100 9400 0.024
51202 15 32 12 16.6 24.8 4900 7500 0.046
51103 17 30 9 10.8 18.2 6100 9400 0.028
51203 17 25 12 17.2 27.3 4900 7500 0.053
51104 20 25 10 14.2 24.7 5100 7900 0.04
51204 20 40 14 22.3 37.7 3900 6000 0.082
51304 20 47 18 35 55.8 3600 4500 0.092
51105 25 42 11 19.5 37.2 4400 6800 0.059
51205 25 47 15 27.8 50.4 3600 5500 0.12
51305 25 52 18 35.7 61.4 3100 4800 0.18
51405 25 60 24 55.6 89.4 2600 4000 0.34
51106 30 47 11 20.4 42.2 4300 6600 0.068
51206 30 52 16 29.3 58.2 3400 5200 0.15
51306 30 60 21 42.8 78.7 2700 4200 0.27
51406 30 70 28 72.8 126 2200 3400 0.53
51107 35 52 12 20.4 44.7 3900 6000 0.09
51207 35 62 18 39.2 78.2 2900 4500 0.22
51307 35 68 24 55.5 105 2400 3700 0.39
51407 35 80 32 87.1 155 1900 2900 0.79
51108 40 60 13 26.9 62.8 3400 5300 0.12
51208 40 68 19 46.9 98.3 2700 4200 0.27
51308 40 78 26 69.3 135 2100 3300 0.55
51408 40 90 36 113 205 1700 2600 1.14
51109 45 65 14 27.8 69.1 3200 5000 0.15
51209 45 73 20 47.7 105 2600 4000 0.32
51309 45 85 28 80 163 1900 3000 0.69
51409 45 100 39 130 242 1500 2300 1.47

Advantages of Ball Bearings

What is a ball bearing? A ball bearing is a type of rolling-element bearing that utilizes balls to maintain separation between two bearing races. Its contact angle between the balls and the races helps it reduce friction between the loads. There are several advantages to ball bearings, including their ability to withstand water. Read on to learn more. Here are a few of the benefits. You can use them in your daily life, from your car to your boat.

Ball bearings reduce friction between loads

Ball bearings reduce friction between loads by constraining the relative motion between moving parts. These bearings consist of a ring of small metal balls that reduce friction between moving objects. The name “ball bearing” is derived from the verb “to bear.” The lubricant within the bearing reduces friction between moving particles. In a machine, ball bearings reduce friction between moving parts and improve linear motion around a fixed axis.
These bearings are commonly used to reduce friction between loads in rotating machines. They have two tracks, one fixed to the rotating part and one stationary. The rolling balls of a ball bearing have lower friction than flat surfaces. Because of this, they are useful for bar stool bearings. They reduce friction between surfaces and maintain the separation between bearing races. Hence, minimal surface contact is possible. Ball bearings have the potential to increase the life of machines and reduce energy consumption.
Ball bearings can be as small as a wrist watch or as large as an industrial motor. They function the same way, reducing friction between loads. Among their many uses, ball bearings are essential for everyday operations. Clocks, air conditioners, fans, and automobile axles all use ball bearings. In fact, anything that uses a motor requires ball bearings. It’s no wonder they’re gaining popularity in industries and everyday life.
bearing

They support radial and axial loads

Radial ball bearings are used primarily for radial loads, but they also have a capacity for axial load. This load capacity is usually given as a percentage of the radial load rating. Axial load capacity is generally greater for a bearing with a larger difference between the inner and outer ring diameters. The axial load capacity is also affected by the bearing’s raceway depth, with shallow raceways being more suitable for heavier axial loads.
The two main types of axial and radial loads are defined by their orientation. Axial loads apply forces in one direction while radial loads act on the opposite direction. In both cases, the bearing must support the forces that are imposed. Axial loads apply forces to a bearing in a single direction, while radial loads apply forces in both directions. Regardless of the type of load, axial and radial loads should be considered when selecting a bearing for a given application.
Angular and radial ball bearings differ in their materials. Radial ball bearings are made largely of through-hardened materials. They typically have a Rockwell hardness rating of 58 Rc. The raceways and balls of these bearings are made of 440C stainless steel. They may also contain shields and seals. SAE 52100 steel is the most common material for the raceway, while molybdenum steels are excellent for high temperatures.

They have a contact angle between the balls and the races

When comparing axial load bearings with their radial counterparts, the angular contact angle is more important. Axial load bearings, have a contact angle between the balls and the races of 35 degrees. They are suitable for axial loads and a limited radial load. The contact angle of these bearings is a result of the shape of the inner and outer rings. Each rolling element comes into contact with the inner and outer rings only at one point, forming a 30 degree angle with the radial plane. The radial force of the axial load on these bearings is therefore increased by increasing the contact angle between the balls and the races.
This contact angle determines the amount of friction between the balls and the races, and allows angular contact bearings to withstand heavy radial and thrust loads. In addition, the larger the contact angle, the greater the axial load support. Angular contact bearings come in standard imperial (inch) and metric (mm) sizes. The angular contact angle is determined by the free radial play value and the curvature of the inner track.

They are water-resistant

In addition to their water-resistant qualities, corrosion-resistant ball bearings can also protect against the damaging effects of corrosive environments. Generally, standard metals, such as steel, are susceptible to rust, which can significantly reduce their performance and extend the life of parts. However, plastics, stainless steel, and ceramics can provide corrosion-resistant ball bearings. And because these materials are much more durable, they offer other advantages, such as being easy to maintain.
Among the advantages of plastic ball bearings is their high resistance to extreme temperatures, high speeds, and corrosion. Depending on their construction, plastic bearings are often able to resist corrosion and anti-static properties. They’re lightweight and inexpensive compared to steel ball bearings. CZPT Sales Corporation was established in 1987 with a modest turnover of four lacs. As of the last financial year, it has grown to 500 lacs in sales.
Other advantages of water-resistant ball bearings include corrosion resistance, which is a key consideration in many applications. While stainless steel is highly corrosion-resistant, it decreases the bearing’s load-carrying capacity. Also, corrosion-resistant deep groove ball bearings are usually made with a specified internal clearance, which absorbs loss in clearance during mounting and shaft expansion. This factor affects their performance, and if these are compromised, a replacement may be necessary.
bearing

They are tough

A few things make ball bearings tough: they’re made of real materials, which means that they have inherent imperfections. Grade-1 balls are made especially for high-stress applications, such as Formula One engines. Grade-3 balls, on the other hand, strike the perfect balance between performance and cost. Ceramic balls, for example, are made to spin at a high rate of 400 RPM, and they’re finished with a mirror finish.
A steel carbon ball bearing is one of the toughest forms of ball bearings available. The material is incredibly strong, but the contact between the balls isn’t the best. Low-carbon steel is best for linear shafting and is usually coated with a polymer to prevent damage. Steel ball bearings with moderate amounts of carbon are tough, durable, and water-resistant. They’re ideal for gears, but their high-carbon steel counterparts are particularly tough and can resist corrosion.
A ceramic ball bearing is another option. This type has steel inner and outer rings but ceramic balls. Ceramic balls can withstand higher temperatures than steel and are also electrically insulating. Ceramic ball bearings also tend to be lighter and are more resistant to wear and tear. They’re also ideal for applications in which grease is not an option, such as in space shuttles. Despite the fact that ceramic ball bearings are tough, they’re still cheaper than steel ball bearings.

They are conductive

You may have heard the term “ball bearing” if you’ve studied introductory physics. What does that mean? Essentially, ball bearings are conductive because of their ability to conduct electricity. This ability is reflected in the charge distribution on the surface of the ball. Positive charges are drawn toward the positive plate, while negative charges are drawn away from the positively charged ball bearing. You may have even seen a ball bearing in action.
However, despite their conductive nature, ball bearings can still become damaged by electrical discharge. A higher voltage can cause the balls to pit, and the raceways to become uneven. These uneven surfaces will first show up as excessive noise, and eventually cause the bearing to malfunction. Fortunately, engineers have found a way to counter this problem: conductive grease. This grease enables current to flow through the ball bearing, preventing both heat and voltage buildup.
The difference between steel and ceramic ball bearings is their density. Steel bearings are more conductive than glass or hybrid ceramics. Steel ball bearings have an even grain structure and are conductive for resonance flow. When moving fast, the air surrounding the steel ball bearing carries resonance from the inner ring to the outer. This makes them ideal for high-speed resonance transfer. In addition to being conductive, glass microbeads are harder and lighter than steel.
bearing

They are used in pulley systems

Pulley systems use ball bearings to move the sprocket, which is a wheel that rotates. These bearings are installed on the center mounting hole of the pulley wheel. They protect the entire system from heat, while allowing higher speed and smooth operation. They distribute the weight of the load evenly, minimizing friction and wobbling, and ensure a smooth rotation. Ball bearings are typically made from steel and are installed inside the pulley wheel.
The moment of inertia and bearing friction are measured to within ten percent accuracy. These two variables affect the speed of the pulley system, which can lead to crashes if the weight holders are not balanced. Therefore, ball bearings are used to minimize the chance of such crashes. When you want to know more about ball bearings in pulley systems, here are the advantages they provide.
Another benefit of ball bearings in pulley systems is that they have lower friction than their solid counterparts. In order to reduce friction, however, ball bearings must be made of good materials. Some of the common ball materials are high-quality plastics and stainless steel. Good materials and clever block design are essential to minimizing friction. If you are planning to use ball bearings in your pulley system, check out the following tips and make sure you are choosing the right one for your application.
China 51206 High Performance Single Row Thrust Ball Bearing     bearing assemblyChina 51206 High Performance Single Row Thrust Ball Bearing     bearing assembly
editor by CX 2023-03-27

Recent Posts